Star Wars - A-Wing

This is one of the rebellion's most awesome weapons, fast enough to give even a Tie Interceptor a good run for it money and equipped with both lasers and torpedo's, it has the fire power to worry all but the largest of the Empires capital ships. But resources are scarce and this particular model bears the scars of battle and shows the wear and tare of constantly relocating from base to base. Pilots have to be prepared to fly these vehicles on the seat of their pants as the A-Wing can be most unkind to more timid pilots. However, it is the spirit of the men and women who maintain ships like this who are the real heroes, without them, these machines would still be on the drawing board somewhere, and the Empire would be even closer to victory.

This is another one of those little 'SNAP' models from a few years ago. I used no filler at all mainly because all the parts fit together so well, but this was before I started using filler. I used to just pipe extra glue between the cracks and paint over it when the glue was dry. This is okay until a few years later when the glue starts to discolour and the joins show through the paint again.

I practised on this model with various weathering techniques, some better than others. I think this has had half a dozen washes and paint smeared here and there to try and give the model a really well worn look.

I could do lots more with it including detailing the cockpit and pilot but you have got to decide when to stop fiddling sooner or later am trying a new photographic technique, instead of using a neutral background I am using a book with space images as a backdrop. This save on a lot of post production but with varying results.

(c) 1999 David Pagett - Birmingham, England

DLP Guitars - Handmade in Birmingham, England

Star Wars - Y-Wing Bomber

This is another of the little SNAP models I have built. There is loads of weathering to make it look really well used and maintained on a low budget as is true of most rebel ships. After finishing the model I used enamel paints to pick out the details and then used various shades of black and brown water colour paints to add wear and tear. Using this technique the water colour paints would not spread evenly but eventually dried giving the patchy, flaked paint effect.

As you can see from the un-touched photos, the Y-Wing has its landing gear down. I had to erase these for the final picture to give the illusion of space flight.

I quickly photographed the model on my window ledge with no other lighting other than daylight and the flash of the camera. This meant I had some balancing to do once the image was in the PC. I airbrushed the join from the back of the cockpit as this model was built before I discovered the art of filling, and I had to copy and paste one of the rear exhaust struts because it was over exposed by the flash. Then I added the engine glow and Blaster glow and overlaid it on a picture of the moon I found on the internet.

I would like to say this model is complete but it needs a coat of matt varnish just to seal all the different textures and finishes, the yellow decals are too shiny for starters.

(c) 1999 David Pagett - Birmingham, England

Star Trek - USS DEFIANT

This is the USS Defiant as featured in Star Trek DS9. I completed the model some time ago and the basic construction was very simple, however the paint job was a different kettle of fish altogether.

I think this was one of the first models I used filler to any effect. The basic construction was quick but left a few joins around the edge so I used a ready mixed filler that dries when exposed to the air. Most model makers seem to favour car filler so I might look at this in the future. The problem was the details on the model surface got sanded away which made painting difficult.

When I came to painting the Defiant I first sprayed it grey to give a good surface for the rest of the details, then I started to pick out the other colours, but as I said, most of the boundaries had been sanded away so I used masking tape to try and recreate them. It soon came apparent that I could not be as accurate as the original lines so I decided on a new tactic.

I decided to go for a really dirty looking ship which meant the lines did not have to be perfect. I just imagined the Defiant had visited a particularly inhospitable planet and had to take the ship down to the surface and landed in a swamp. Of course they haven't found a Spaceship wash yet!
Bottoms Up !This is the Bottom of the Defiant with some of the white windows just about visible. I used gloss white enamel on these so they would stand out more against the matt weathered look of the rest of the ship.

Once I had decided on this approach I could then be a bit more careless with the blue and yellow panels knowing I could hide the lines with dirty washes later.

This was a great project for learning new techniques but I think I would like another crack at it just to make a 'cleaner' Defiant that Sisko would be proud of ! The decals were quite difficult on this model because the was a lot of long, red lines which have to be kept straight.

I like the finished result but I love the shape of this ship more than it's paint job. I am sure this would be how the Millennium Falcon would look if it was designed in the nineties, it's got that 'Hot Rod' look about it.

DLP Guitars - Handmade in Birmingham, England

Star Wars - Tie Interceptor

This is a ETRL/MPC model I made quite a few years ago. I photographed it with an old 35mm camera and scanned the image when the film was developed. (which was what prompted me to buy my first digital camera!) I then cut out the shape of the ship using Adobe Photoshop and adjusted the color balance slightly. You can see the yellow glow of my bedside lamp in the cockpit window. I then found an image of the awsome comet Hale-Bopp and merged the two in Photoshop to create the final image.

As you can see from the original photo the join in the cockpit was very pronounced. Nowadays I would fill these in but I used to have very little patience.

The comet is Hale-Bopp but it could be a Rebel Cruiser burning up in the planets atmosphere! This Tie Interceptor must also be modified to operate in the planets atmosphere as well as space!

(c)2009 David Pagett

Star Wars - Boba Fett's Slave-1

Star Wars - Boba Fett - Slave 1 (Modified Firespray Patrol Attack Ship)

This is Boba Fett's heavily modified Firespray patrol and attack ship Slave 1. It is scared with battle damage and every mark tells a different story of a thrilling escape or spectacular shoot out deep in space. I enjoyed this model because it is so different to anything else I have ever made. Most star ships resemble aircraft in some shape of form but Slave 1 breaks all the rules. The cockpit moves depending if the ship is in space upright or lying on it's back in a docking bay.

The two 'wings' move on my model but I glued the cockpit in the space configuration. The cargo hold can also be left open to show a tiny Hans Solo encased in Carbonate, but I sealed the door shut. I used a micro-drill to make some small holes in the hull to simulate Blaster damage, the holes do look really good close up. I spent quite some time on the paint job but it is not completely accurate. The movie slave 1 has a different corrosion pattern, mine is blurred, theirs is sharper as though the paint has flaked off, but I still like my paint scheme.

DLP Guitars - Handmade in Birmingham, England